These operations are accessible by remote control.
Some may also be accessible by control panel on the main unit.
Initial setup
Thissectionwillguideyouthroughtheunit'sinitialsettingwhich
includesselectingalanguageforyouron-screenmenuandautoprogram,
whichautomaticallyscansandmemorizesviewablechannels.
Before you begin:
Makesuretheunitisconnectedtoantennaorcable.
1
Aftermakingallthenecessaryconnections, press toTurnOnthe
unit.
• ItmaytakeafewmomentstoTurnOntheunitforthefirsttime.
• Initial setupmenuappearsautomaticallyaftertheunitisTurned
On.
2
Use▲▼toselecttheon-screenlanguagefromthechoices
(English/Español/Français)ontherightsideoftheTVscreen, then
pressOK.
3
Use▲▼toselectAntennaforTVchannelsorCableforCATV
channels, thenpressOK.
Initial setup
Make sure the antenna is connected to ''ANTENNA IN'' jack.
Select your signal source.
Antenna
Cable
Or
Select
OK
– WhenAntennaisselected, theTVdetectsantennasignals. It
searchesforDTVandAnalogTVchannelsavailableinyourarea.
– WhenCableisselected, theTVdetectssignalssuppliedbycable. It
searchesforDTV, AnalogTVandCablechannelsavailableinyour
area.
• Autoprogramwillbegin.
Initial setup
Please wait while the system is scanning for channels.
Auto programming may take more than 20 minutes to
complete.
0%
Digital channels
Analog channels
Antenna
Cable
Skip
ANTENNA IN
Back
Skip
0 ch
0 ch
Skip
4
Use▲▼toselectthedesiredlocationsetting, thenpressOK.
Initial setup
Location Home is recommended for normal home use.
In the Retail Store mode, all settings are fixed.
Select
• SelectRetail, theunitwillbesetupwithpredefinedsettingfor
retaildisplays.
• SelectHome, theunitissettomaximizetheenergyefficiency
forhomesettinganditcanbeadjustedthroughachoiceof
pictureandsoundqualityaccordingtoyourpreference. Usethis
settingtoremovetheE-stickerifvisiblefromthedisplay.
5
WhenyouselectHome, pressOKtobeginSettings assistant.
Settings assistant
Settings assistant helps you customize picture settings.
You will see a series of test pictures where the right side and
left side differ. Select the side that is most pleasing to you
with the Left/ Right keys.
Next
6
PressÍ orÆ 3timestoselectthesideofthepicturesthatisthe
mostpleasingtoyou, thenpressOK.
Left side
1/3 Select the picture setting that you prefer.
Select
Next
7
PressOKtofinishSettings assistant.
Settings assistant
You have set up your viewing preferences.
Store
• Whentheinitialsetupiscompleted, thelowestmemorized
channelwiththeconfirmationmessageofthelocationsetting
willbedisplayedontheTVscreen.
• YoumustsetHomeinstep4. Otherwise, PictureandSound
settingsyouadjustedwillnotbememorizedaftertheunitgoes
intoStandbymode.
12
Retail
Home
OK
p. 27
➠
Back
Exit
Right side
Back
Exit
Back
Exit
Continued on next page.
English