Table of Contents
Advertisement
User's Guide
Frequency Range
Maximum Radio-Frequency Power
Transmitted
Coordination Modes
*4
Wireless Securities
*1
IEEE802.11n is only available for the HT20.
*2
Not supported for IEEE 802.11b.
*3
Simple AP mode is compatible with a Wi-Fi connection (infrastructure) or an Ethernet connection.
*4
Wi-Fi Direct supports WPA2-PSK (AES) only.
*5
Complies with WPA2 standards with support for WPA/WPA2 Personal.
Ethernet Specifications
Standards
Communication Mode
Connector
*1
Use a category 5e or higher STP (Shielded twisted pair) cable to prevent risk of radio interference.
*2
The connected device should comply with IEEE802.3az standards.
Security Protocol
*
IEEE802.1X
IPsec/IP Filtering
SSL/TLS
SMTPS (STARTTLS, SSL/TLS)
SNMPv3
*
You need to use a device for connection that complies with IEEE802.1X.
PostScript Level 3 Compatibility
The PostScript used on this printer is compatible with PostScript Level 3.
Appendix
2.4 GHz
20 dBm (EIRP)
Infrastructure, Wi-Fi Direct (Simple AP)
WEP (64/128bit), WPA2-PSK (AES)
*1
IEEE802.3i (10BASE-T)
IEEE802.3u (100BASE-TX)
*1
IEEE802.3ab (1000BASE-T)
IEEE802.3az (Energy Efficient Ethernet)
Auto, 10 Mbps Full duplex, 10 Mbps Half duplex, 100 Mbps Full duplex, 100 Mbps
Half duplex
RJ-45
HTTPS Server/Client
IPPS
154
*2*3
*5
*2
Advertisement
Table of Contents
