Burst Mode - Panasonic Lumix DMC-GX80KEBK Owner's Manual For Advanced Features

5. 4K Photo and Drive Settings

Burst Mode

Setting the burst rate
∫
After pressing 3 in step
burst rate, and press [MENU/SET].
Mechanical
Burst speed
(pictures/
second)
Electronic Shutter
Live View during Burst Mode
With RAW files
¢1
Without RAW files
¢1 Number of recordable pictures
¢2 When recording is performed under the test conditions specified by Panasonic.
The burst speed will become slower halfway. However, pictures can be taken until the
capacity of the card becomes full. Depending on recording conditions, the number of burst
pictures that can be taken will be reduced.
•
The picture size will be fixed to [S] when [Burst Rate] is set to [SH].
•
The burst speed may become slower depending on the following settings.
–
[Picture Size] (P192)/[Quality] (P193)/[Sensitivity] (P112)/Focus Mode (P95)/[Focus/Release
Priority] (P212)
About the maximum number of pictures that can be taken continuously
∫
When you press the shutter button halfway, the maximum number
of pictures you can take continuously will appear. You can check
the approximate number of pictures that can be taken before the
burst speed slows down.
Example: When 20 pictures can be taken: [r20]
•
Once recording starts, the maximum number of pictures that can be taken continuously will
decrease. When [r0] appears, the burst speed will slow down.
•
When [r99+] is displayed, you can take 100 or more pictures continuously.
2
on P134, press 2/1 to select the
[SH]
(Super high
speed)
shutter
40
None
Max. 120
[H]
(High speed)
8 (AFS)
—
6 (AFC)
10 (AFS)
6 (AFC)
None
—
135
SH H M
LV LV
[M]
(Middle
(Low speed)
speed)
6
6
Available Available
2
¢
40 or more
2
100 or more ¢
0
2
00
L
[L]
2
2
r20 20 20