Table of Contents
Advertisement
10. Using the Wi-Fi function
[Wi-Fi Function Lock]
•
For information on how to enter characters, refer to P61.
•
Make a copy of password.
If you forget the password, you can reset it with [Reset Wi-Fi Settings] in the [Setup] menu,
however other settings will also be reset. (excluding [LUMIX CLUB])
[Network Address]
•
A "MAC Address" is a unique address that is used to identify network equipment.
•
"IP address" refers to a number that identifies a PC connected to a network such as the
Internet. Usually, the addresses for homes are automatically assigned by the DHCP function
such as a wireless access point. (Example: 192.168.0.87)
[Approved
Regulations]
To prevent incorrect operation or use of the Wi-Fi function by a
third party and to protect saved personal information, it is
recommended that you protect the Wi-Fi function with a
password.
Setting a password will automatically display the password input
screen when the Wi-Fi function is used.
[Setup]:
Enter any 4-digit numbers as the password.
[Cancel]
Displays the MAC address and IP address of this unit.
Displays the certification number for radio regulations.
289
Advertisement
Table of Contents
