Table of Contents
Advertisement
10. Using the Wi-Fi function
Recording location information and images
∫
1
Start recording location information with the smartphone.
1 Start "Image App".
2 Select [
3 Select [Geotagging].
4 Select [
2
Record images with the camera.
3
Stop recording the location information with the smartphone.
1 Select [
Writing the location information to the images
∫
(Preparation on the camera)
Connect to a smartphone.
4
Operate the smartphone.
1 Start "Image App".
2 Select [
3 Select [Geotagging].
4 Select [
•
Follow the on-screen messages to operate the smartphone.
•
Images with location information are indicated with [
•
Cautions for Use:
Be sure to pay special attention to the privacy, the likeness rights, etc. of the subject
when you use this function. Use at your own risk.
•
The smartphone battery drains faster while location information is being recorded.
When recording of location information is not necessary, stop it.
•
On the smartphone, you can set the acquisition interval of location information and check the
transfer status of location information.
Refer to [Help] in the "Image App" menu for details.
Not available in these cases:
•
Location information cannot be written to the following images or in the following situations:
–
Images recorded after location information was sent to the camera
–
Motion pictures recorded in [AVCHD]
–
Images with location information already written to them
(P254)
].
] to start recording location information.
] to stop recording the location information.
(P255)
(P254)
].
] to send and write the location information.
262
].
Advertisement
Table of Contents
