Lenovo 20BV001CGE User Manual page 155

Audio problems
• Problem: Wave or MIDI sound does not play correctly.
Solution: Make sure that the audio device is configured correctly.
1. Go to Control Panel.
2. Click Hardware and Sound.
3. Click Device Manager. If you are prompted for an administrator password or confirmation, type the
password or provide confirmation.
4. Double-click Sound, video and game controllers.
5. Make sure that the Realtek HD Audio driver is enabled and configured correctly:
• Problem: Sound does not come from a headphone or a speaker, or your computer cannot record sounds.
Solution: To switch from one device to another (for example, from a speaker to a headphone, or from an
external microphone to a microphone), do the following:
1. Go to Control Panel and click Hardware and Sound.
2. Click the Realtek HD Manager icon.
3. Make sure that you are in MULTI-STREAM mode in the Device advanced settings window.
4. In the Volume Mixer window, select the device you want-for example, speakers.
5. Play any sound via a music program (for example, Windows Media Player). Make sure that sound
comes from speakers now.
6. Then, if you would like to switch to a headphone, close the music program.
7. Go to the Volume Mixer window. Then select another device, which is now the headphone.
8. Play any sound via the music program. Make sure that sound comes from a headphone attached
directly to the system.
For more information, refer to the help information system of Realtek HD Manager.
Note: In the Volume Mixer window of Realtek HD Manager, a check mark by the entry for a device,
such as speakers for a playback device, or a microphone for a recording device, shows that the device
has been selected.
• Problem: Recordings made using the microphone input are not loud enough.
Solution: Make sure that the Microphone Boost function is turned on and set by doing the following:
1. Go to Control Panel and click Hardware and Sound.
2. Click Sound.
3. Click the Recording tab in the Sound window.
4. Select Microphone, and click the Properties button.
5. Click the Levels tab, and move the Microphone Boost slider upwards.
6. Click OK.
Note: For more information about controlling volume, see the Windows online help.
• Problem: A volume or balance slider cannot be moved.
Solution: The slider might be grayed out. This means that its position is fixed by the hardware and
cannot be changed.
• Problem: The volume sliders do not stay in place when some audio programs are used.
Solution: It is normal for the sliders to change position when certain sound programs are used. The
programs are aware of the settings in the Volume Mixer window and are allowed to change the settings
themselves. An example is the Windows Media Player. Usually the program has sliders available to
control the sound from within the program.
.
Chapter 10 Troubleshooting computer problems
139