Feed Water Pipe Installation; Height Adjustment - LG GWB227WLQV Owner's Manual

Table of Contents

Advertisement

Available languages

Available languages

Before
installation
Warning
If the freezer
compartment
door is lower than
the refrigerator
compartment
door
If the freezer
compartment
door is higher than
the refrigerator
compartment
door


Feed water pipe installation (Dispenser model only)
▪Automatic ice maker operation needs water pressure of 147~834kPa
(1.5~8.5kgf/cm2) (The pressure is correct when an instant paper cup (180cc) is
filled in 3 sec.).
▪If water pressure does not reach the rating 147kPa(1.5kgf/cm
is necessary to purchase a separate pressure pump for normal automatic icing
and cool water feed.
▪Keep the total length of the feed water pipe tube within 8m and be careful that
the tube does not bend. If the tube is 8m or longer it may cause water feed
problems owing to the drain water pressure.▪Install the feed water pipe tube at
a place free from heat.
▪Connect to drinking water supply only.
▪Refer to instructions with water filter kit for installation.

Height adjustment

Level the door by inserting flat( - type) driver into the groove of the left height 
adjusting screw and rotate it clockwise (   ).
Level the door by inserting flat( - type) driver into the groove of the left height 
adjusting screw and rotate it clockwise (   ).
Height
difference
Height difference
Left height
adjustment screw
Height difference
Installation
2
) or below, it
Height
difference
Right height
adjustment screw

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents