Ubiquiti PowerBean fante Quick Start Manual page 4

LEDs
Signal
shown below:
Ethernet
when an active Ethernet connection is made and
flash when there is activity.
Power
device is connected to a power source.
The default values (from left to right) are
LED will light blue when the wireless signal
strength is equal to or above -65 dBm.
LED will light blue when the wireless signal
strength is equal to or above -73 dBm.
LED will light blue when the wireless signal
strength is equal to or above -80 dBm.
LED will light blue when the wireless signal
strength is equal to or above -94 dBm.
The Ethernet LED will light steady blue
The Power LED will light blue when the