Table of Contents
Advertisement
26
English
Cleaning & storage
Warranty and support
Recycling
3 After charging, remove the adapter from the wall socket and pull the
small plug out of the device.
Note: The battery functionality is not enough for a full body treatment. We
recommend you to use the device attached to the wall socket while treating
large body areas such as legs and/or arms.
Tip: Charge the device after each use to save battery life.
1 After use, switch off the device, unplug it and let it cool down.
Note: Light exit window and the attachment can become very hot after
usage.
2 Remove the attachment.
3 Moisten the soft cloth supplied with the device with a few drops of water
and use it to clean the following parts:
-
the light exit window on the device
-
the outside surface of the attachments
-
the reflector inside the attachments
-
the transparent filter glass in the bikini and the precision attachment
-
the reddish filter glass inside the facial attachment
-
the skin tone sensor window
4 Let all parts air dry thoroughly.
5 Store the device in a dust-free place at a temperature between -25° to
+70°C and a humidity range between 15-90%.
If you need information or support, please visit www.philips.com/support or
read the international warranty leaflet.
- Do not throw away the product with the normal household waste at the
end of its life, but hand it in at an official collection point for recycling. By
doing this, you help to preserve the environment.
Philips Lumea products contain recyclable materials and should not be put
into the municipal waste stream. Refer to the Philips Lumea support website
for recycling options. Do not dispose of in fire.
Advertisement
Chapters
Table of Contents
