Note
•
If the USB device does not have enough memory to
displayed.
•
With MP3-CD playback, you can only record all tracks
in the current folder.
Set the timer
If a timer is set, the product will be turned on
automatically after a preset time.
Note
•
Make sure that clock is set correctly.
1
In standby mode, press and hold TIMER
for two seconds.
» [TIMER SET] is displayed, then a
prompt to select the sound source is
displayed.
2
Press
/
repeatedly to select a sound
source: DISC, USB, FM, or AM.
3
Press TIMER
» [12H] or [24H] is displayed.
4
Press
/
to select 12 hour or 24 hour
format.
5
Press TIMER
» In 12 hour format, [AM] or [PM] is
displayed. Repeat steps 4 to 5 to select
AM or PM. Then the hour digits begin
» In 24 hour format, the hour digits begin
6
Repeat steps 4 to 5 to set the hour,
minute, and the volume of the sound
source.
» If the product is in standby or Eco
power standby mode, the selected
sound source will be activated when
the preset time comes.
EN
18
Note
•
To cancel timer setting, press
•
During timer setting, if no action is taken within
90 seconds, the product exits timer setting mode
automatically.
Activate or deactivate the timer
•
In standby mode, press TIMER repeatedly
to activate or deactivate the timer.
» If the alarm timer is activated, [TIMER
ON] is displayed.
» If the alarm timer is deactivated,
[TIMER OFF] is displayed.
Set sleep timer
•
When the product is turned on, press
SLEEP repeatedly to select a period of
» The product switches to standby
mode automatically after the preset
time period.
» When [SLEEP OFF]
is displayed, the sleep timer is
deactivated.
.