Table of Contents
Advertisement
6 Other features
Set the alarm timer
This unit can be used as an alarm
clock. You can select DISC, USB, or
TUNER as the alarm source.
Note
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold SLEEP/
TIMER for 3 seconds.
2
Press
/
repeatedly to select an
alarm source (DISC, USB,or TUNER)
3
Press SLEEP/TIMER to confirm.
» The hour digits begin to blink.
4
Repeat steps 2-3 to set the hour, minute,
and adjust volume of the alarm.
Note
•
If no button is pressed in 90 seconds, the system exits
timer setting mode automatically.
To activate or deactivate the alarm timer:
Press SLEEP/TIMER repeatedly to view
•
the alarm information and activate or
deactivate the alarm.
» If the timer is activated, [TIMER] is
displayed.
» If the timer is deactivated, [TIMER
OFF] is displayed and [TIMER]
disappears.
EN
Tip
•
If no DISC or USB is detected, the system will use FM
as the default alarm source.
Set the sleep timer
Press SLEEP/TIMER to set the number of
•
minutes before the unit automatically turns
off:
[SLP 120]
•
[SLP 90]
•
[SLP 60]
•
[SLP 45]
•
[SLP 30]
•
[SLP 15]
•
[SLP OFF]
•
Tip
•
Sleep timer can only be set when the unit is ‘On’.
Page 18
Advertisement
Table of Contents
