Connect Power; Set Clock; Turn On - Philips NTX400X User Manual

1
Open the battery compartment.
2
Insert one AAA battery with correct
3
Close the battery compartment.

Connect power

Caution
•
Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the back or the underside of the product.
•
Risk of electric shock! When you unplug the power
cord, always pull the plug from the socket. Never pull
the cord.
Note
•
Before connecting to AC power, make sure that you
have completed all other connections.
1
Adjust the voltage selector on the back of
the main unit to match your local power
supply.
2
Connect the AC power plug to the power
outlet.

Set clock

1
In standby mode, press and hold CLOCK
for two seconds.
» [CLOCK SET] appears, then [12H] or
[24H] is displayed.
2
Press / repeatedly to select 12 hour
or 24 hour format.
3
Press CLOCK
»
4
Repeat steps 2 to 3 to set the hour and
minute.
Note
•
To cancel clock setting, press
•
During clock setting, if no action is taken within 90 seconds,
the product exits clock setting mode automatically.
•
The clock is displayed in standby mode. To view the
clock in working or ECO power standby mode, press
and hold CLOCK for two seconds.

Turn on

Press .
» The product switches to the last
selected source.
Switch to standby mode
Press again to switch the product to standby
mode.
»
To switch between standby mode and Eco
power standby mode:
Press and hold for two seconds.
» In Eco power standby mode, the
button lights up red, and the display
backlight is off.
Tip
•
The product switches to Eco power standby mode
automatically after 10 minutes in standby mode.
.
EN
9