Philips D535 Extended User Documentation page 30

Activate/deactivate the blacklist
1
Press MENU/OK.
2
Select [Privacy mode], then press MENU/
OK to confirm.
3
Enter the incoming call block PIN/
passcode. The default PIN is 0000. Then
press MENU/OK to confirm.
4
Select [Call block] > [Block mode] >
[On]/[Off], then press MENU/OK to
confirm.
» The setting is saved.
Add blacklist numbers
1
Press MENU/OK.
2
Select [Privacy mode], then press MENU/
OK to confirm.
3
Enter the incoming call block PIN/
passcode. The default PIN is 0000. Then
press MENU/OK to confirm.
4
Select [Call block] > [Block number], then
press MENU/OK to confirm.
5
Enter the number, then press MENU/OK
to confirm.
» The setting is saved.
Change the blacklist PIN/passcode
1
Press MENU/OK.
2
Select [Privacy mode], then press MENU/
OK to confirm.
3
Enter the old incoming call block PIN/
passcode. The default PIN is 0000. Then
press MENU/OK to confirm.
4
Select [Call block]> [Change PIN], then
press MENU/OK to confirm.
5
Enter the new PIN/passcode, then press
MENU/OK to confirm.
6
Enter the new PIN/passcode again, then
press MENU/OK to confirm.
» The setting is saved.
EN
28