One-Touch Timer Recording (Otr) - Sharp DV-RW250S Operation Manual

One-touch Timer Recording (OTR)

The One-touch Timer Recording
feature provides a simple and con-
venient way to make a timed re-
cording.
TV/VCR
NOTE:
If you wish to watch the DVD play-
back during the VCR OTR, press
DVD/VCR to change to DVD mode
and perform the DVD playback. You
can also playback the VCR during
DVD OTR.
50
GB
Preparation:
• Turn ON the TV and select its AV channel (this may be labelled EXT
/ AUX etc.)
• Load a recordable DVD or video tape into the unit.
• Press DVD/VCR to select the appropriate mode.
Example: One-touch Timer Recording for 30 minutes.
1
Press REC MODE/SPEED to select the
recording mode.
For the recording mode, see the step 1 on
page 48.
2
Press numeric keys or CH
lect the channel to be recorded.
3
Press REC/OTR. Each additional press of
crease recording time as shown in the chart below, up to a maxi-
mum of 6 hours. The OTR and recording time will appear on the
screen for about 4 seconds.
Recording time Press
Press
once
NORMAL REC
twice
OTR - : - -
3 times OTR 0:30
4 times
OTR 1:00
5 times OTR 1:30
6 times OTR 2:00
To cancel OTR
Press STOP or turn off the power.
/ to se-
Recording time
7 times
OTR 3:00
8 times
OTR 4:00
9 times
OTR 5:00
10 times
OTR 6:00
11 times
NORMAL REC
VCR mode
00 : 00 : 00 SP
DVD mode
SP
CH 29
REC/OTR will in-
VCR mode
OTR 0 : 30
CH 29
INDEX
DVD mode
OTR 0 : 30