Display
Response
Time
ULMB
ULMB Pulse
Width
Reset Display
32
|
Operating the Monitor
Use Display to adjust image.
Allows you to set the Response Time to Normal or Fast.
ULMB (Ultra Low Motion Blur) helps have less of a motion blur effect
while you are watching fast-moving images. When the graphics card
supports G-SYNC, make sure that the Enable G-SYNC function is not
selected in the NVIDIA Control Panel, ULMB will be automatically
enabled.
NOTE:
This function is available when the refresh rate is 85 Hz, 100 Hz
or 120 Hz.
NOTE:
When ULMB is enabled, the message of ULMB Mode is
displayed on the lower-left corner of the OSD. When G-SYNC is
enabled in the NVIDIA Control Panel, the message of G-SYNC Mode is
displayed instead. If your system doesn't support G-SYNC, then the
message of Normal Mode is displayed.
Allows you to adjust the panel's backlight a bit, so as to reduce motion
blur. Use
or
decrease motion blur and brightness.
Select this option to restore default display settings.
to adjust the level from 10 to 100. Smaller values