Table of Contents
Advertisement
[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an item from the sub-
menu.
Refer to "Navigating through the menu" (x page 57) for the operation of the menu screen.
f When the projector is used for the first time
Initial password: Press awsqawsq in order, and press the <ENTER> button.
f After selecting the item, press asqw to set.
Attention
f When you select the [SECURITY] menu and press the <ENTER> button, entering a password is required. Enter the preset password and
then continue operations of the [SECURITY] menu.
f When the password has been changed previously, enter the changed password, and press the <ENTER> button.
Note
f The entered password is displayed with * marks on the screen.
f An error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password.
[SECURITY PASSWORD]
Display the [SECURITY PASSWORD] screen when the power is turned on with the power of the track system turned off. If an incorrect
password has been entered, operations other than the power <v/b> button and the <AV MUTE> button become disabled.
1)
Press as to select [SECURITY PASSWORD].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
Note
f [SECURITY PASSWORD] is set to [OFF] at the time of purchase or when [ALL USER DATA] in [INITIALIZE] (x page 77) has been
performed.
f Change the password periodically that is hard to guess.
f Security password is enabled by setting [SECURITY PASSWORD] to [ON] and turn off the power of the track system to shut the power
supply to the projector.
[SECURITY PASSWORD CHANGE]
Change the security password.
1)
Press as to select [SECURITY PASSWORD CHANGE].
2)
Press the <ENTER> button.
f The [SECURITY PASSWORD CHANGE] screen is displayed.
3)
Press asqw and the number (<1> - <6>) buttons to set the password.
f Up to eight button operations can be set.
4)
Press the <ENTER> button.
5)
Re-enter the password for the confirmation.
6)
Press the <ENTER> button.
Note
f The entered password is displayed with * marks on the screen.
f If the remote control is lost after a security password has been set, initialization of the security password is required. Consult your dealer for
the method of initialization.
Chapter 4 Settings — [SECURITY] menu
Disables the security password entry.
Enables the security password entry.
ENGLISH - 91
Advertisement
Table of Contents
