Hitachi CP-AX3005 User Manual page 55

Item
START UP
MyScreen
(continued on next page)
Using the ▲/▼ buttons switches the mode for the start-up screen.
The start-up screen is a screen displayed when no signal or an
unsuitable signal is detected.
MyScreen ó ORIGINAL ó OFF
MyScreen : Screen can be registered by the MyScreen item (55).
ORIGINAL : Screen preset as the standard screen.
OFF : Plain black screen.
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL
screen will change to the BLANK screen (54) after several
minutes. If also the BLANK screen is the MyScreen or ORIGINAL,
the plain black screen is instead used.
• When the ON is selected to the MyScreen PASSWORD item in
the SECURITY menu (76), the START UP is fixed to MyScreen.
This item allows you to capture an image for use as a MyScreen
image which can be used as the BLANK screen and START UP
screen. Display the image you want to capture before executing the
following procedure.
Selecting this item displays a dialog
titled "MyScreen". It will ask you if
you start capturing an image from the
current screen.
Please wait for the target image to be displayed, and press the
ENTER or INPUT button to start registration.
To restore the screen and return to the previous dialog, press the
RESET button on the remote control.
Registration may take several minutes.
When the registration is completed, the registered screen and the
following message is displayed for several seconds:
"MyScreen registration is finished."
If the registration failed, the following message is displayed:
"A capturing error has occurred. Please try again."
• This function cannot be selected when the ON is selected to the
MyScreen Lock item (56).
• This function cannot be selected when the ON is selected to the
MyScreen PASSWORD item in SECURITY menu (76).
• This function is unavailable for a signal from the LAN, USB TYPE A,
USB TYPE B or HDMI 1/2 port.
Description
SCREEN menu
55