Hitachi CP-AX3005 User Manual page 111

Troubleshooting
Phenomena that may be easy to be mistaken for machine defects (continued)
Phenomenon
Sound does not
come out.
(continued on next page)
Cases not involving a machine defect
The signal cables are not correctly connected.
Correctly connect the audio cables.
The MUTE function is working.
Restore the sound pressing VOLUME +/- button on the
remote control.
The volume is adjusted to an extremely low level.
Adjust the volume to a higher level using the menu function
or the remote control.
The AUDIO SOURCE/SPEAKER setting is not correct.
Correctly set the AUDIO SOURCE/SPEAKER in AUDIO menu.
The Sound button (♪) or checkbox is disabled.
If you have selected USB TYPE A, turn the sound on from
the Thumbnail menu.
If you have selected USB TYPE B, put a check mark on the
Sound checkbox in the Options window of "LiveViewer Lite
for USB".
If you have selected LAN, put a check mark on the Sound
checkbox in the Option menu of "LiveViewer".
Reference
page
9 ~ 14
23
23, 53
53
83, 93,
97
111