Hitachi CP-AX3005 User Manual page 34

EASY MENU
Item
PICTURE MODE
ECO MODE
INSTALLATION
RESET
FILTER TIME
(continued on next page)
34
Using the ◄/► buttons switches the picture mode.
The picture modes are combinations of GAMMA and COLOR TEMP
settings. Choose a suitable mode according to the projected source.
NORMAL ó CINEMA ó DYNAMIC ó BOARD(BLACK)
DICOM SIM.
PHOTO ó DAYTIME ó WHITEBOARD ó BOARD(GREEN)
• When the combination of GAMMA and COLOR TEMP differs
from pre-assigned modes above, the display on the menu for the
PICTURE MODE is "CUSTOM". Please refer to the GAMMA and
COLOR TEMP (37, 38) items in PICTURE menu.
• Lines or other noise might appear on the screen when this function
is operated, but it is not a malfunction.
• DICOM SIM. is the projector's DICOM
Communication in Medicine") simulation mode. This mode
simulates the DICOM standard, which is a standard applicable to
digital communications in medicine, and can be useful for displaying
medical images, such as X-rays photos. This projector is not a
medical device and is not compliant to the DICOM standard, and
neither the projector nor the DICOM SIM. mode should be used for
medical diagnosis.
Using the ◄/► buttons changes the eco mode setting.
See the ECO MODE item of the LAMP & FILTER item in SETUP
menu. (50)
• When the ambient temperature is around 35 to 40°C, the
brightness of lamp is reduced automatically.
Pressing the ► button displays the INSTALLATION dialog.
See the INSTALLATION item in SETUP menu (52).
Performing this item resets all of the EASY MENU items except the
FILTER TIME and LANGUAGE.
A dialog is displayed for confirmation. Selecting the OK using the ►
button performs resetting.
The usage time of the air filter is shown in the menu.
Performing this item resets the filter time which counts usage time
of the air filter.
A dialog is displayed for confirmation. Selecting the OK using the ►
button performs resetting.
See the FILTER TIME item of the LAMP & FILTER item in SETUP
menu. (51)
Description
("Digital Imaging and
®