Your Car Stereo Speakers; Introduction; What's In The Box; Installation - Philips CMB2102/55 User Manual

2 Your car stereo
speakers
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
at www.philips.com/welcome.

Introduction

With the speakers, you can enjoy high power
music with vivid sound.

What's in the box

a b
d e
Check and identify the contents of your
package:
a Speakers (x2)
b Grille net + Frame (x2)
c Speaker wire (x2)
d Screw (x8)
e Shrapnel (x8)

3 Installation

A depth of at least 46mm is required to mount
the speaker. Measure the depth of the area
where you are to mount the speaker, and
ensure that the speaker does not obstruct any
other components of the car.
Option 1: Mount on door
(front or rear)
You can mount the speakers on the front/rear
door of your car.
c
•
•
•
1
2
3
Nota
Make sure that nothing obstructs around the mounting
location of the door.
A hole for mounting may already be cut out of the
inner panel of the door
(front or rear). In this case, you need to modify the
board only.
Ensure that the speaker terminals, frame or magnet do
not interfere with any inner parts, such as the window
mechanism in the door (when you open or close the
window), etc. Also ensure that the speaker grille does
not touch any inner fittings, such as the window cranks,
door handles, arm rests etc.
Turn off the car ignition key.
• If the power is on, the click noise
generated by the connection may
damage the speakers.
Cut out the mounting template from the
packing box.
Paste the template on the location
selected for mounting the speaker.
5