Toyotomi UTN-18AP User Manual page 86

CHILD LOCK FUNCTION
Press and simultaneously to turn on or turn off child lock function. When
child lock function is on,
the remote controller, icon
the unit.
SELF CLEAN FUNCTION
Under unit off status, hold "MODE" and "FAN" buttons simultaneously for 5
seconds to turn on or off the SELF CLEAN function. When the SELF CLEAN
function is turned on, indoor displays "CL". During the SELF CLEAN process
of evaporator, the unit will perform fast cooling or fast heating. There may be
some noise, which is the sound of fl owing liquid or thermal expansion or cold
shrinkage. The air conditioner may blow cold or warm air, which is a normal
phenomenon. During cleaning process, please make sure the room is well
ventilated to avoid affecting the comfort.
Note:
• The SELF CLEAN function can only work under normal ambient
temperature. If the room is dusty, clean it once a month. If not, clean it
once every three months. After the SELF CLEAN function is turned on, you
can leave the room. When SELF CLEAN is fi nished, the air conditioner will
enter standby status.
TEMPERATURE DISPLAY SWITCHOVER FUNCTION
Under OFF status, press
temperature display between ºC and ºF.
BASIC OPERATION GUIDE
1 After putting through the power, press "ON/OFF" button or remote controller
to turn on the air conditioner. Press it again to turn it off.
2 Press "MODE" button to select your required mode: AUTO, COOL, DRY,
FAN, HEAT.
3 Press or button to set your required temperature. Temperature cannot
be adjusted under auto mode.
4 Press "FAN" button to set your required fan speed: auto, low speed, low-
medium speed, medium speed, medium-high speed, high speed.
5 Press button to select fan blowing angle.
icon is displayed on remote controller. If you operate
will blink three times without sending signal to
and "MODE" buttons simultaneously to switch
86
GB