Table of Contents
Advertisement
Refilling Ink Tank
When remaining ink cautions or errors occur, the message will appear on the LCD to inform you of the error.
In this state, the printer cannot print. Check the remaining ink level with the ink tank indicator on the front of
the printer. If the ink level is near the lower limit line (A), refill the ink tank.
Note
• If print results become faint or white streaks appear despite sufficient ink levels, see
Procedure.
• For precautionary notes on handling ink bottles, see
Refilling Procedure
When you refill the ink tank, follow the steps below.
Important
• Please ensure the printer remains flat after initial setup and is NOT turned upside down or on its side,
as ink in the printer may leak.
1.
Check that printer is turned on.
2. Open the scanning unit / cover (B).
Important
• Do not touch tubes or other parts inside the printer. This can cause trouble with the printer.
Notes on ink
bottles.
103
Maintenance
Advertisement
Table of Contents
