Table of Contents
Advertisement
Reconfiguration Method of LAN Connection/Reconfiguration
Method of Wi-Fi Connection
Reconfiguration Method of LAN Connection
Reconfiguration Method of Wi-Fi Connection
Reconfiguration Method of LAN Connection
Follow either procedure below to change LAN connection method (wired or Wi-Fi).
• Click here and redo setup.
• Enable Wi-Fi or wired LAN on the operation panel of the printer. After that, perform settings on the
Network Settings screen on IJ Network Device Setup Utility.
For details, refer to
Connection (Ethernet Cable)
Reconfiguration Method of Wi-Fi Connection
Follow either procedure below to change Wi-Fi connection method (infrastructure or Wireless Direct).
• Click here and redo setup.
• Perform settings on the Network Settings screen on IJ Network Device Setup Utility.
Important
• Before you perform settings using IJ Network Device Setup Utility, turn on Easy WL connect
mode on the printer following the procedure below.
1.
Check that printer is turned on.
2. Press and hold Wireless connect button for 3 seconds.
LCD and Operation Panel
3. Perform operations following instructions on your smartphone or tablet.
4. If message saying setup is completed appears, press OK button.
Performing/Changing Wi-Fi Settings
Settings.
or
Performing/Changing Wired LAN
51
Advertisement
Table of Contents
