Canon EF 70-200mm Instructions Manual page 14

9. Tripod Mount (Sold Separately)
This lens can be used with the A II (W II) tripod mount ring, sold separately.
Attaching the Tripod Mount
Collar
②
1
Open the collar of the tripod
mount
Turn the lock knob
● ●
counterclockwise until it
becomes loose (about 3 turns)
( ).
➀
Pull the knob in the direction
● ●
of the arrow ( ) to release the
➁
collar ( ).
➂
When removing the tripod mount, hold the camera and lens and remove the mount following the
above procedure in reverse.
Adjusting the Tripod Mount
By turning and loosening the lock knob of the tripod mount, you can rotate the camera to set the
image for any vertical or horizontal position.
③
①
Lock
knob
2
Attach tripod mount to lens
With the collar open, insert
● ●
the tripod mount into the
attachment area and close the
collar (
Tripod
④
mounting
location
).
➃
⑥
⑦
⑤
3
Fix tripod mount to lens
While pulling the lock knob
● ●
( ), insert the end of the
➄
open collar until it reaches its
original position (
➅
Turn and tighten the lock
● ●
knob, fixing it securely to the
lens ( ).
➆
).
ENG-13