Table of Contents
Advertisement
Install Memory Modules
You must install genuine Synology memory module(s) to ensure system compatibility and reliability. Be sure to
follow the configurations below for the suggested installation sequence of different memory capacities, otherwise
the system may not boot successfully, or system performance and stability may suffer.
A0
A1
16 GB
-
32 GB
-
16 GB
-
16 GB
16 GB
16 GB
16 GB
32 GB
-
32 GB
32 GB
32 GB
32 GB
Note:
It is required to use identical memory modules of the same capacity and frequency together.
Follow the steps below to install, check, or remove a memory module on your FS3600.
To install the RAM module:
1 Shut down your FS3600. Disconnect all cables connected to your FS3600 to prevent any possible damage.
2 Remove the screw on the back of FS3600. Pull the rear top cover, and put it aside.
Note:
When you remove the rear top cover, the sensitive internal components are exposed. Avoid touching anything
other than the memory assembly when you remove or add memory.
11 Chapter 2: Hardware Setup
B0
B1
-
-
-
-
16 GB
-
16 GB
-
16 GB
16 GB
32 GB
-
32 GB
-
32 GB
32 GB
Total Memory
16 GB
32 GB
32 GB
48 GB
64 GB
64 GB
96 GB
128 GB
Advertisement
Table of Contents
