Table of Contents
Advertisement
Hardware Setup
Tools and Parts for Component Installation
Please prepare the tools and parts below before setting up your Synology NAS:
• A screwdriver
• At least one 2.5" SSD (SAS/SATA) or HDD (SAS only) (please visit
compatible drive models).
Warning:
If you install a drive that contains data, the system will format the drive and erase all existing data. Please
back up any important data before installation.
• Rail mounting kit (please see the Optional Accessories section to find out the suitable rail kit for cabinet
installation)
Warning:
We suggest mounting your Synology NAS on a cabinet before installing any drives since the heavy weight
will increase the installation difficulty.
Install Drives
Please follow the steps below for drive installation:
1 Open the drive tray.
a Find the small button located on the bottom side of the drive tray handle. Press the button down, and the
drive tray handle will pop out.
b Pull the drive tray handle out as illustrated above.
2 Place the drive in the drive tray. Tighten screws into the four spots indicated below to secure the drive.
9
www.synology.com/compatibility
2
Chapter
for
Advertisement
Table of Contents
