Table of Contents
Advertisement
3 Insert the new memory module in the slot:
a Push the retaining clips on the slot out to the sides.
b Align the notch on the gold edge of the module with the notch in the memory slot.
c Push down on the memory module with firm and even pressure. The retaining clips will snap into position as
the module is correctly inserted.
Hold the memory module by its edges, and do not touch the gold connectors.
Note:
4 Put back the rear top cover you lifted in step 2.
a Align the hexagons at the side of rear top cover with the slots on the chassis' edge, and push the rear top
cover back in position.
b Put back and fasten the screw you removed in step 2.
12 Chapter 2: Hardware Setup
Advertisement
Table of Contents
