Starting The Monitor - Gateway FPD1975W User Manual

6

Starting the monitor

To start the monitor:
1
2
3
www.gateway.com
Turn on the speaker bar by rotating the power/volume knob clockwise.
Important
The appearance of your monitor may vary from that shown.
Press the power button on the front of monitor. The power LED on the power button turns
on.
Turn on your computer.
After your computer is running, the power LED on the monitor's power button should be
blue. Allow about 10 seconds for the display image to appear. If the power LED is not blue
or you do not see a display image, check the connections. For more troubleshooting
information, see "Troubleshooting" on page
Adjust the tilt of the monitor for the best viewing angle.
Important
When adjusting the monitor settings, always press the Auto button before
entering the OSD. This will automatically adjust the display image to the ideal
settings for the current screen resolution.
18.
11