Table of Contents
Advertisement
If You Can't Connect via Bluetooth for Use with an App
If the pairing process of "Using the Piano with an App" (p. 20) is not successful, try the following procedure.
1
Make sure that the piano's Bluetooth function is "On"
2
Exit all apps on your mobile device
3
If already paired, cancel pairing, and turn off the
Bluetooth function
4
Perform the pairing procedure of p. 20 from step 1
Make sure that the piano's Bluetooth function is "On"
1
1.
Press the piano's [ ] button.
The [ ] button is lit, and the piano is in function mode.
2.
Turn the [ ] knob to access the "Bluetooth" screen, and
press the [ ] knob to confirm.
You enter the Bluetooth setting screen.
3.
Turn the [ ] knob to access the "Bluetooth On/Off"
screen, and press the [ ] knob to confirm.
4.
Turn the [ ] knob to select "On."
The piano's Bluetooth function turns on.
5.
Press the [ ] button.
The [ ] button goes dark, and you exit function mode.
Exit all apps on your mobile device
2
Closing the app
Double-click the home button, and swipe up on the app screen.
Connecting the Piano and a Mobile Device via Bluetooth
If already paired, cancel pairing, and turn off the
3
Bluetooth function
Clearing the pairing
1.
In the mobile device's screen, tap the "i" located beside
"Connected," and tap "Forget This Device."
HP704
2.
Turn the Bluetooth switch off.
Perform the pairing procedure of p. 20 from step 1
4
If you've checked the steps to take when pairing is not successful,
and are still unable to connect with the app, access the following
URL and find your nearest Roland Service Center or authorized
Roland distributor in your country.
http://roland.cm/service
If you have more than one piano
When pairing with a mobile device in a situation where there are
multiple pianos, such as in a music classroom, you can assign an
ID to each piano.
Assigning an ID
When you make this setting, an ID number is added to the end of
the device name that's shown on the mobile device.
(such as "HP704 Audio1" "HP704 MIDI 1")
1.
Press the [
] button.
2.
Access the "Bluetooth" screen, and press the [ ] knob to confirm.
3.
Turn the [ ] knob to select "Bluetooth ID."
4.
Press the [ ] knob to confirm, and turn the [ ] knob to change the
number.
ID
Explanation
Set to "0": "HP704 Audio" "HP704 MIDI" (default value)
0–99
Set to "1": "HP704 Audio 1" "HP704 MIDI 1"
* If you are pairing in an environment where there are multiple pianos, we
recommend that you turn on the power of the mobile device and only
those pianos that you want to pair (turn off the power of other devices).
21
Advertisement
Table of Contents
