Status Menu - Gateway Solo 9150 User Manual

Gateway solo 9150: user guide
Hide thumbs Also See for Solo 9150:
Table of Contents

Advertisement

Important!
In Windows 98™,
Microsoft® has replaced
the term "Suspend" with
"Standby."
Standby is used when
referring to Windows 98™
and Suspend is used when
referring to Windows 95™.
Important!
Changes in power
management levels are
temporary and do not affect
the power settings in the
BIOS setup screens. The
changes are only in effect
until the notebook is
restarted, then the BIOS
power settings are restored.
58
Using Your Gateway Solo™ 9150 Notebook
The following settings are most commonly changed:
Power button mode
power button, the notebook can be set to either Shut Down or Standby.
Press the spacebar to select
provides preset or customized power management.
PM Control
Setting this option to
performance.
Setting this option to
performance.
Setting this option to
and
Hard disk,
options.
Auto dim with battery
battery power only. Press the spacebar to select

Status menu

The
menu is supported by the VGA controller chip. The menu opens
Status
in the upper left corner and closes after about 30 seconds.
Power status display appears when you press the F
with the F2 (Status). It shows current battery status. The display is
updated when you change any function choice.
Battery status appears in the top two lines. The first line reflects the
status of the primary battery pack. The second line reflects the status
of the optional secondary battery.
The power management levels appear in the third and fourth lines. You
can change power management levels during setup.
AC power status is monitored on the fifth line.
The Brightness meter shows the brightness level for the LCD panel.
Press the F
key simultaneously with the up arrow or down arrow key
N
to increase or decrease the brightness level.
sets power switch functionality. When you press the
/
or
On
Off
Standby
Maximum Performance
Maximum Battery Life
lets you manually set the
Customize
. Press the spacebar to choose between
Video timeouts
decreases the LCD brightness 50% when using
/
.
Resume
gives the best system
gives the best battery
Standby,
or
.
On
Off
key together
N

Advertisement

Table of Contents
loading

Table of Contents