Advertisement
17
Clear the
check box.
18
If the Portable System Restoration CD is not already in the drive, insert it
into the CD/DVD drive, then click
Restoration CD program autostarts, close it.
19
If a PCI Ethernet controller was previously detected, select the path
d:\9300\9300pro\modem\win95-98\
- OR -
If a PCI Ethernet controller was not previously detected, select the path
d:\9300\win95-98\modem\
20
Click
Next
21
Click
Finish
computer.
22
If additional "New Hardware Found" dialog boxes open, complete the
wizards by following the on-screen instructions. All necessary drivers are
installed.
23
Restart your notebook.
4
check box, then select the
Floppy disk drives
, then click
until the driver finishes installing.
, then click
when you are prompted to restart the
No
. If the Portable System
Browse
, then click
.
OK
.
OK
Specify a location
Advertisement
