Advertisement
Notes:
• When the main switch is set to position "1" or "",
negative ions, which are invisible to the naked eye,
are produced.
• Gripping the ion charge panel has the benefit of more
negative ions continuing to penetrate into the hair,
supplementing the moisture content, moistening the
hair and giving clearer results in relation to the
negative ions.
• If you are worried about damaging your hair, set the
switches to the " healthy air" and "1" position
respectively prior to use.
Panasonic Ionic Technology
The Panasonic Hair Dryer uses negative ions to
reduce the build-up of static electricity and help to
keep your hair in excellent condition by allowing
moisture to penetrate into hair.
Notes - The effect of ion dose not show up too much
on person with features described below.
• Having original curl hair.
• Having hair to be furled easily.
• Having wonderful and tidy hair.
• Having hair straightening perm no more than -
months.
• Having short hair.
EH-NE50_CH.indb
9
Repair and Maintenance of the Hair dryer
1. Only qualified personnel should repair or
disassemble the hair dryer.
. If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent, or similarly
qualified persons in order to avoid a hazard.
. If air frequently becomes cold when using hot air, or
sparks are sometimes seen inside the hair dryer,
please seek advice or contact an authorized
Panasonic service center for repair.
. If sparks occur inside the negative ion outlets, this
may be due to the electrodes becoming dirty,
resulting in abnormal discharge. If this happens,
clean the parts of the inside of the negative ion
outlets in accordance with the cleaning method
below.
Cleaning method
Clean only after turning off the power and removing
the power cord from the power outlet.
Use a cotton swab to lightly rub (about 5 times) the
point of the needle that is inside the negative ion
outlets.
We recommend the thin cotton swabs made for
use with babies. Although regular cotton swabs will
work, they may be hard to insert into the outlets.
Do not use hard objects to clean, or allow hard
objects to come into contact with, the parts of the
negative ion outlets so as to avoid causing them to
become deformed, which would affect the
discharge of negative ions and be dangerous.
9
2009/05/22
10:33:04
Advertisement
