Yamaha CVP-109 Reference Booklet page 62

4
62
CVP-109/107/105/103/700
Downloaded from: http://www.usersmanualguide.com/
• Three screws on each side
V
Attach the front legs.
Securely attach the two front legs using three 5 x 12
millimeter large screws for each leg (use a Philips "+"
screwdriver) as shown in the illustration. Make sure that
the screws are firmly tightened.
B
Attach the speaker box.
Remove the speaker box cover (attached to the speaker
box in 6 places with plastic plugs) from the speaker box.
Gently rest the speaker box onto the corresponding brack-
ets on the front legs. (Be careful not to touch the speakers
when handling the speaker box. Damage may result.)
Make sure the speaker cord is extending out from the rear
of the speaker box. Loosely secure the speaker box to the
main keyboard unit using four 5 x 12 millimeter large
screws on both the front and back. (The speaker will be
secured in step N.) Insert the speaker cord connector into
the corresponding socket on the main keyboard unit, mak-
ing sure that the protruding clip on the connector is facing
up.
5
CVP-109
• Four screws on each side