Yamaha CVP-109 Reference Booklet page 57

6
5 x 20 mm long screws
B
Downloaded from: http://www.usersmanualguide.com/
5 x 20 mm long screws
A
N
Attach the front leg/frame screws.
Firmly attach the front legs (A) and (B) to the frame on the
bottom of the main unit using two 5 x 20 mm long screws for
each leg.
M
Voltage Selector
Check the setting of the voltage selector which is provided in
some areas. To set the selector for 110V, 127V, 220V or 240V
main voltages, use a "minus" screwdriver to rotate the selector
dial so that the correct voltage for your region appears next to the
pointer on the panel. The voltage selector is set at 240V when the
unit is initially shipped.
CAUTION
• An improper voltage setting can cause serious damage to the
CVP-700 or result in improper operation.
7
A voltage selector is provided in some
areas.
127
CVP-109/107/105/103/700
57