Beamz LED PARBAR 4Way Kit 7x 10Watt Quad LED DMX Instruction Manual page 7

13 channel
14 channel
4th PAR
15 channel
16 channel
17 channel
18 channel
ALL PARS
19 channel
Modes
Static color select
Show select
Show select (no sound to
light mode)
Sound to light mode

If you press a button on the rear panel with the foot controller connected, the Parbar will turn off the foot controller and
you will have to reset the power in order for it to work again.
Master/Slave operation
Master/slave operation is linking more than 1 LED Parbar together (DMX-in / DMX-out on the Bar).
0
1-255
0
1-255
0
1-255
0
1-255
0
1-255
0
1-255
0-5
6-100
101-200
201-255
Foot Controller
Sub selection
Choose from 9 preset colors
Choose from 13 preset shows all sound to light activated except
fade
Color fade
None
None
light closed
Red 0-100%
light closed
Green 0-100%
light closed
Blue 0-100%
light closed
White 0-100%
light closed
Dimmer
light closed
Strobe speed
light closed
Color change (slof to fast
Color auto run
Sound control
1. Power IN
2. On/Off switch
3. Mode switch
4. Up switch
5. Down switch
7
Display
Col 1 ‐ 9
SH 0 ‐ 12
Fade
SH 0 ‐ 12
SH 0