Beamz LED PARBAR 4Way Kit 7x 10Watt Quad LED DMX Instruction Manual page 5

1. Power IN
2. LED Display
3. Control operation
4. Sound sensitivity
5. Microphone
6. DMX IN
7. DMX OUT
8. Remote connection
Display:
This product has an internal control system and interface. The system is configured and navigated via the menu, down
and up buttons shown in the picture below.
Press MENU buttons to enter different working modes.
Modes:
1. Sound mode – outputs built-in programs from the Parbar in time with the music. Activated via the built-in
microphone.
2. Auto color mode – Via Menu Display. Activated and set via the onboard controller.
3. DMX 512 mode – Control each individual LED colour, brightness, strobe, dimmer, color fade and sound control.
4. Master / Slave mode – Set up SLND
Menu display function
Display
ADDR(DMX address set up)
SLND(Master and Slave set up)
CHND (Channel Mode set up)
SHND (Program set up)
COLO (Color set up)
LED (background light set up)
DISP (Set display up or upside down)
TEST(Color Auto-Test)
FHNS
Set DMX address 1 - 512
NAST (Master)
SLAV (Slave)
5CH / 19CH
SH 0.......SH12, 12 different shows to choose from
SP 1......SP 8, FADE speed
COL1.......COL9 (15 kinds of color)
NANV (manual mode)
ON/OFF
ON/OFF
Color Auto-Test
Use time
5
Function
Red:0---255
Green: 0---255
Blue: 0---255
White: 0--255