System Setup - Samsung SL-M4075FX/SEE User Manual

System setup

Item
Sets the machine's default mode among fax mode, copy
Default Mode
mode, or scan mode.
Default Paper Size You can set the default paper size to use.
Sets how long the machine waits before going to power
save mode.
Power Save
When the machine does not receive data for an extended
period of time, power consumption is automatically
lowered.
Sets the time that the machine remembers previously
System Timeout used copy settings. After the timeout, the machine
restores the default copy settings.
Sets the length of time the printer waits before printing
Job Timeout the last page of a print job that does not end with a
command to print the page.
Held Job Timeout Sets the time to hold the temprarily stopped job.
When this option is "On", you can wake up the machine
from the power saving mode with the following actions:
• loading paper in a tray
Wakeup Event
• opening or closing the front cover
• pulling a tray out or pushing a tray in
• connecting a USB memory device (only for the models
that support USB memory devices)
Description Item
Determine whether or not the machine continues
printing when it detects the paper does not match the
paper settings.
• 0 Sec: This option allows you to continue printing
when the paper size you have set is mismatched with
the paper in the tray.
Auto Continue
• 30 Sec: If a paper mismatch occurs, an error message
will display. The machine waits for about 30 second,
then automatically clear the message and continue
printing.
• Off: If a paper mismatch occurs, the machine waits
until you insert the correct paper.
Altitude Optimize print quality according to the machine's
Adjustment altitude.
Allows you to append the required carriage return to
Auto CR
each line feed, which is useful for Unix or DOS users.
Firmware Version Shows the product's firmware version.
If you use a machine in a humid area, or you are using the
damp print media caused by a high humidity, the print-
outs on the output tray may be curled and may not be
Paper Stacking
stacked properly. In this case, you can set the machine to
use this function to let print-outs stacked firmly. But,
using this function will make the print speed slow.
Description
239
3. Useful Setting Menus