Connecting The Hdbase-T - Samsung DC-E Series User Manual

Connecting the HDBase-T

― EME models are only supported.
― Connecting parts may differ in different products.
― HDBase-T (Tx) transmits data from an external device to HDBase-T (Rx). Make sure to connect them directly using a LAN cable.
― Data transmission is not available if HDBase-T (Rx) is connected to HDBase-T (Tx) through a hub.
― HDBase-T works with unshielded twisted pair (UTP) or shielded twisted pair (STP) cables; but, to ensure CE compliance, STP cables and STP Connectors are required.
Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance.
It is recommended to use an STP cable to maximize performance. Using a UTP cable or patch may decrease performance.
HDBase-T (Rx)
HDBT IN
LAN Cable
HDBase-T (Tx)
LAN HDMI IN
HDMI OUT
HDMI OUT
HDMI OUT
46