Sony HVL-F42AM Operating Instructions Manual page 47

To change the recording mode that can use the manual
flash mode (M)
Press the LEVEL button to select the recording mode that can use the
manual flash mode.
• The power level is changed from 1/1 to 1/2 each time the LEVEL button is
pressed.
1/1: (corresponds M mode of the camera only)
1/2: (corresponds all modes of the camera)
• For details on setting the power level, refer to page 26.
• When "1/2" is selected, manual flash photography may be used in all recording
modes of your camera. The proper exposure may not be obtained with
photography in modes other than the M mode of your camera, therefore we
recommend the M mode of your camera.
47
GB