Sony HVL-F42AM Operating Instructions Manual page 43

Setting wireless flash by the flash
unit only
When the flash unit is attached to the camera and the wireless flash set up, the
channel information is transmitted to the camera. This means that if you continue to
use the same camera and flash combination without changing the wireless channel
then you can also set the flash unit and camera separately to wireless.
Camera setting:
Set to the wireless flash mode.
For details, refer to the operating instructions supplied with your camera.
Flash unit setting:
Press the MODE button to turn on the wireless flash lamp,
either [ WL CH1] or [ WL CH2].
See page 44 for further details.
Auto WB Adjustment with Color
Temperature Info
Flash unit sends color temperature info to α camera. Color temperature is
automatically adjusted to standard white by α camera.
• This function works when Sony digital single-lens reflex camera (other than
DSLR-A100) is used.
• This function works with TTL flash mode using the clip-on connection with the
camera.
43
GB