Sony DVP-FX870 Operating Instructions Manual page 16

• During operation, "
This symbol indicates that a function explained in
this operating instruction is not available on the
current DVD VIDEO.
• Some DVD-RWs/DVD-Rs (VR mode) may take
time before starting playback because of the
recorded content.
To stop playback
Press x.
Pressing H again will start playback from
the point you stopped (Resume Play). See
page 17 for details.
To play from the beginning, press x twice,
then press H.
To turn off the power
Press the remote's \/1 button or slide the
player's \/1/HOLD switch to "\/1."
To avoid accidental button operation on
the player
Set the player's \/1/HOLD switch to
"HOLD." All the buttons on the player are
locked, while the button on the remote
remains operable.
To play DTS sound tracks on a DVD VIDEO
• The player's speaker does not output DTS
sound. When you play DTS sound tracks on
a DVD VIDEO, connect the player to an
AV amplifier (receiver) (page 39) and set
up "DTS" in "Audio Setup" (page 35).
• If you connect the player to audio
equipment such as an AV amplifier
(receiver) without a DTS decoder, do not set
"DTS" to "On" in "Audio Setup" (page 35).
A loud noise may come out from the
speakers, which may affect your ears or
cause speaker damage.
Notes
• A screen saver image appears when you leave the
player in pause or stop without operation for more
than 15 minutes. The image disappears when you
press H. See page 34 for details.
• The player turns off, 15 minutes after starting the
screen saver function (Auto Power Off).
16
GB
" may appear on the screen.
Additional playback operations
1
4
7
.
X
To
Stop
Pause
Go to the next chapter,
track, or scene in
continuous play mode
Go back to the
previous chapter,
track, or scene in
continuous play mode
Briefly fast forward
the current scene*
* DVD VIDEOs, DVD-RWs/DVD-Rs (VR mode)
only.
The above functions may not be used for some
scenes.
2 3
5 6
8 9
0
>
x
Operation
Press x
Press X
Press >
Press .
Press during
playback.