Indicator Of Program Sequence; Childproof Lock; Selecting A Different Program; Cancel Program - Bosch 300 Series Use And Care Manual / Installation Instructions

Hide thumbs Also See for 300 Series:
Table of Contents

Advertisement

If required, select Low Heat by pressing the button.
3.
~ Additional Program Option settings; Page 27
If required, select Wrinkle Block by pressing the
4.
button.
~ Additional Program Option settings; Page 27
Tip: The estimated remaining time will be updated.

Indicator of program sequence

Bosch dryers use an advanced control system which
continually monitors the laundry's remaining moisture.
The current state of the process and status of the
program is shown by indicator lights (Damp,
End).

Childproof lock

You can secure the dryer against inadvertent changing of
the set functions. To do this, activate the childproof lock
after cycle start.
To Activate/Deactivate, touch Time dry and Finish in
buttons at the same time for 3 seconds. In the display
field, you will see the
D
childproof lock is active.
NOTICE: The childproof lock will remain activated until
the next cycle start even after switching the machine off.
You must deactivate the childproof lock before the next
cycle and, if necessary, activate it again after starting the
cycle.
, Dry,
=
symbol light indicating the

Selecting a different program

If you have inadvertently started the wrong program, you
can change this as follows:
Touch Start/Pause.
1.
Select another program.
2.
Touch Start/Pause. The new drying cycle starts from
3.
the beginning.

Cancel program

If required, you can cancel the selected program:
Touch Start/Pause.
1.
Rotate the program selector to Off.
2.

Program end

End appears in the display area and the Start/Pause
button indicator lamp is off.
After the program end, rotate the program selector to
Off.
Removing laundry/switching the
appliance off
Open the door and remove the laundry.
1.
Turn the program selector to the Off position.
2.
Appliance is switched off and dryer light goes out.
Clean lint filter.
3.
~ Cleaning the lint filter; Page 29
Close the door.
4.
Tip: If the display panel switches off and the Start/Pause
button indicator is blinking at the end of a program, the
Energy-saving mode is active. To activate the display,
press any button.
~ Environmentally friendly use of your dryer; Page 8
23

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wtg86400uc

Table of Contents