Program Selection; Selecting Program Settings And Additional Options - Bosch 300 Series Use And Care Manual / Installation Instructions

Program selection

For optimum drying results your dryer offers several
different types of programs to choose from.
Select the required drying program from the program
table according to the examples.~ Program selection
table; Page 26
Automatic programs
There are automatic programs for different types of
textiles (regular/cotton, permanent press).
The program sequence of automatic programs is
controlled by sensors. The duration of the program
depends on the measured degree of moisture in the
laundry and on the selected degree of dryness (e.g.
Cotton Dry or Cotton Extra Dry).
Regular/Cotton
▯
Permanent Press
▯
Special programs
The programs Sanitize, Jeans, Anti Shrink, Super Quick
15, Towels, Bulky/Large Items and Heavy Duty
(depending on model) are made for special type fabric
loads.
~ Program selection table; Page 26
Time programs
Time programs run at specific temperatures and are
suitable for delicate items, individual or a few small items
and subsequent drying.
~ Default Program and Option settings; Page 27
Selecting program settings and additional
options
By selecting program settings and additional options,
you can adjust the drying process to better suit the items
you are drying.
The settings can be selected and deselected depending
on the cycle progress.
The indicator lamps of the buttons light up if the setting is
active.
For Time dry, Finish in, Wrinkle Block, Low Heat and
Signal the settings are not retained after the appliance is
switched off.
~ Default Program and Option settings; Page 27
~ Additional Program Option settings; Page 27
For Dry Level the setting is retained after the appliance is
switched off.
~ Dry Level; Page 27
21