Using The Program Selector To Choose A Drying Cycle; Program Selection; Selecting Program Settings And Additional Options - Bosch WTG86400UC Use And Care Manual / Installation Instructions

Using the program selector to choose a
drying cycle
NOTICE: If you have activated the childproof lock, you
must deactivate it before you can set a program.
~ Childproof lock; Page 22
Use the program selector to select the desired drying
cycle. This dial turns in both directions, switches the
machine on and when a drying cycle is selected the time
duration appears in the display.

Program selection

For optimum drying results your dryer offers several
program groups and additional options.
Select the required drying program from the program
table according to the examples.
~ Program selection table; Page 24
Automatic programs
There are automatic programs for different types of
textiles (regular/cotton, permanent press).
The program sequence of automatic programs is
controlled by sensors. The duration of the program
depends on the measured degree of moisture in the
laundry and on the selected degree of dryness (e.g.
Cotton Dry or Cotton Extra Dry).
Regular/Cotton
▯
Permanent Press
▯
20
Special programs
The programs Sanitize, Jeans, Anti Shrink, Super Quick
15, Towels, Bulky/Large Items and Heavy Duty
(depending on model) are made for special type fabric
loads.
~ Program selection table; Page 24
Time programs
Time programs run at specific temperatures. Suitable for
pre-dried, multi-ply, delicate textiles or individual small
items. Also for subsequent drying.
~ Default Program and Option settings; Page 25
Selecting program settings and additional
options
By selecting program settings and additional options,
you can adjust the drying process to better suit the items
you are drying.
The settings can be selected and deselected depending
on the cycle progress.
The indicator lamps of the buttons light up if the setting is
active.
For Time Dry, Finish in, Wrinkle Block, Low Heat and
Signal the settings are not retained after the appliance is
switched off.
~ Default Program and Option settings; Page 25
~ Additional Program Option settings; Page 25
For Dry Level the setting is retained after the appliance is
switched off.
~ Dry Level; Page 25