Product Overview; Main Unit; Rear View; Touch Interface Connection - Elo TouchSystems 1000 Series User Manual

Touch Interface Connection

Before connecting the cables to your touchmonitor and PC, be sure that the computer and
Note:
touchmonitor are turned off.
1. Connect one end of the power adapter to the monitor and the other end to the connector of the
power cord.
2. Connect one end of either the touchscreen serial (RS232) cable or the touchscreen USB cable
(but not both) to the rear side of the computer and the other end to the LCD monitor. Tighten by
turning the two thumb screws clockwise to ensure proper grounding (optional module USB cable
does not have thumb screws).
3. Connect one end of the video cable to the rear side of computer and the other to the LCD monitor.
Tighten by turning the two thumb screws clockwise to ensure proper grounding.
4. Press the power button on the front panel to turn the monitor power on.
2-10 User Guide
3
2
1
Adapter Video Cable Serial Cable
2
USB Cable