Installation Instructions - Haier QDHR35 Owner’s Manual And Installation Instruction

INSTALLATION INSTRUCTIONS

NOTE: Before plugging in the dehumidifier, remove the
casters from the bucket and install as shown below.
Installing the Casters (only for QDHR20 and
QDHR35)
1. Remove the 4 casters from the bag taped to the inside of
the water bucket lid.
2. Carefully lay the dehumidifier down on it's front or back.
3. Following the arrows on the base, slide the 4 casters into
place.
4. Place the unit upright and wait 1 hour before use.
6
Dehumidifier is on it's front
49-5000430 Rev. 2