Using The Low-Cut Filter; Overview Of Recording Modes - Tascam DR-60D MK II Owner's Manual

Turn the DATA dial to set the limiter for mic
4.
input.
Options Meaning
OFF
Limiter off
(default value)
Limiter on only for selected
MONO
channel
Limiter on for both selected
LINK
and linked channels
When finished making the setting, press the
5.
stop (8) [HOME] button to return to the
Home Screen.
16
TASCAM DR-60DMKII

Using the low-cut filter

Use the low-cut filter if you want to cut noise and
other sounds at low frequencies. This function
can be used to reduce air-conditioning noise and
unpleasant wind noise, for example.
Press the MENU button to open the
1.
screen.
Turn the DATA dial to select
2.
INPUT SETTING
and press the DATA dial or / button to
open the screen.
INPUT SETTING
screen appears.
INPUT SETTING
Turn the DATA dial to select
3.
LOW CUT
a channel, and press the DATA dial or /
button.
Ch1 INPUT SETTING
Turn the DATA dial to select the cut off
4.
frequency of the low cut filter for mic input.
Options: OFF (default value), 40Hz, 80Hz, 120Hz
When finished making the setting, press the
5.
stop (8) [HOME] button to return to the
Home Screen.

Overview of recording modes

This recorder has five recording modes.
Use the
REC MODE
to set the recording mode. The settings available are
different for each recording mode.
MENU
MONO mode
This is a mode for mono recording.
,
STEREO mode (default value)
This is a mode for stereo recording of two
independent left and right channels.
for
DUAL MONO mode
This mode uses one input source to create files at
two different input levels (set on
screen). Two mono files will be recorded.
DUAL ST mode
This mode uses one input source to create files at
two different input levels (set on
screen
screen). Two stereo files will be recorded.
4CH mode
This mode records 4 external inputs in two pairs as
two stereo files.
Two stereo files will be recorded.
item on the screen
REC MODE
INPUT SETTING
INPUT SETTING