Changing The Auto Mode Setting; Changing The Fan Speed - Philips AC2887/30 User Manual

» For AC2882, after measuring the
particle matters in the air, the
appliance goes to auto mode
with displayed on the screen
(fig.k).
3
Touch and hold
switch off the appliance.
Note
• After the appliance is switched off by
the on/off button
in the power socket, the appliance will
operate under the previous settings
when it is switched on again.
Changing the Auto mode
setting
You can choose the Pollution mode
( ), the Allergen mode (
Bacteria&Virus mode (
Pollution mode
The specially designed pollution
mode can effectively remove airborne
pollutants such as pm2.5.
•
Touch the Auto mode button
select the Pollution mode (fig.k).
» Auto (A) and
screen.
Allergen mode
The specially designed allergen mode
can effectively remove common
allergens such as pollen and pet
dander.
•
Touch the Auto mode button
select the Allergen mode (fig.l).
» Auto (A) and
screen.
for 3 seconds to
, if the plug is still
) and the
).
to
display on the
to
display on the
Bacteria&Virus mode
The specially designed bacteria&virus
mode can effectively remove bacteria
& viruses such as staphylococcus albsp
and H1N1.
• Touch the Auto mode button
to select the Bacteria&Virus mode
(fig.m).
» Auto (A) and
screen.

Changing the fan speed

There are several fan speeds available.
You can choose the sleep mode (SL),
speed 1, 2, 3 or turbo mode (t).
Sleep (SL)
In sleep mode, the appliance operates
quietly under very low speed.
• Touch the fan speed button
select the sleep mode (SL) (fig.n).
Note
• In sleep mode, "SL" displays on the
screen for one minute. After that,all the
lights will go off and the display screen
will be dimmed with" " displayed.
• You can turn on the lights manually by
touching .
Manual
•
Touch the fan speed button
repeatedly to select the fan speed
you need (fig.p).
Turbo (t)
In turbo mode, the appliance operates
under the highest speed.
• Touch the fan speed button
select the turbo mode (t) (fig.o).
display on the
to
to
EN
7