Control Panel & Remote Control
Control Panel
Using the Control Panel
POWER
RE-SYNC
ENTER
SOURCE
Menu
Help
Four Directional Se-
lect Keys
Keystone
Lamp LED
Temp LED
ON/STAND-
BY LED
User Controls
Refer to the "Power On/Off the Projector" section on
pages 13-14.
Automatically synchronize the projector to the input
source.
Confirm your item selection.
Press "SOURCE" to select an input signal.
Press "Menu" to launch the on-screen display
(OSD) menu. To exit OSD, Press "Menu" again.
Help Menu (only available when OSD menu is not
shown).
Use
ments to your selection.
Use
to adjust image distortion caused
/
by tilting the projector. (
Indicate the projector's lamp status.
Indicate the projector's temperature status.
Indicate the projector's status.
to select items or make adjust-
±40 degrees)
21
English