Epson Expression Premium XP-6005 User Manual page 249

LCD screen message Condition/solution
The printer's borderless The ink pad is at the end of its service life. Turn off the product and contact
printing ink pad has Epson for support.
reached the end of its
service life. It is not a
user-replaceable part.
Please contact Epson
support.
Paper Setup Auto The Paper Configuration setting must be enabled to use AirPrint.
Display is set to Off.
Some features such as
paper size and type
settings may be
unavailable. For details,
see your documentation.
Communication error. Make sure the computer and product are connected. For scanning, make
Check if the computer is sure that Epson Scan 2 and Event Manager are installed on the computer.
connected.
The combination of the There is a problem with the network connection to your product. Check the
IP address and subnet solutions in the links at the end of this topic.
mask is invalid. See
your documentation for
more details.
To use cloud services, Access your product's built-in Web Config utility and update the root
update the root certificate for your product.
certificate from the
Epson Web Config
utility.
Check that the printer Make sure the printer port is selected correctly on the Port tab of the Printer
driver is installed on the Properties screen (Windows) or the System Properties > USB list (Mac).
computer and that the
Select USBXXX for a USB connection or EpsonNet Print Port for a network
USB port settings for the
connection.
printer are correct.
Recovery mode An error has occurred during firmware updating. Connect your product using
a USB cable and try updating the firmware again. If you still receive this error
message, contact Epson for support.
249